What are good options for fans (tower, standing, etc.) - eviltoast

We’re looking for tower fan models/brands specifically, but you can use this post to talk about whatever :)

  • Zomg@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    9 hours ago

    I feel like I might be decently equipped to answer this. My house is older, I have no ceiling fans but I do like constant airflow especially sleeping.

    I’ve went through a few models of tower fans and ran them virtually 24/7 and I think the one I have now has been my best choice.

    I’ve tried a handful of vornado fans, months of use they begin getting louder, more noises start happening until the fan makes such noises that peaceful sleep or presence by them aren’t possible.

    Vornado fans were nice, until they failed from use.

    My current fan is a Dreo. It’s a tower fan but it uses a brushless motor which I didn’t think any of my other fans had. It’s been by far the quietest, which gives me confidence that it’ll last much longer too.

    Might be worth considering: https://www.amazon.com/dp/B09N3HKY79?ref=ppx_pop_mob_ap_share

  • T156@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    arrow-down
    1
    ·
    edit-2
    4 months ago

    Aren’t basically all fans BiFL? They’re very simple devices, without much to go wrong. I’ve never had a fan, even base-budget home-brand department store ones, ever break, unless they fell over, or got hit enough to snap parts, but even BiFL things will break if you abuse them.

    At most, the pedestal fans I’ve used wilt slightly, and that’s easily fixed by tightening the screw in the neck.

    • Otter@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      7
      ·
      4 months ago

      The problem we ran into was the oscillation rattling, or completely not working. I’m planning to try and fix it if I find a good guide for it, but I’d prefer to have bought a better one in the first place

    • evasive_chimpanzee@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      3 months ago

      I had a simple box fan break a blade from falling over due to its own power. A fan with better materials should be able to survive a short fall (and probably shouldn’t be able to blow itself over).

    • Lost_My_Mind@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 months ago

      I’ve had fans with motors burn out. I even had an industrial fan meant for warehouses eventually start smelling like burning when it ran. So I threw that out. I wasn’t about to keep let it running and risk it catching fire.

  • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
    link
    fedilink
    English
    arrow-up
    9
    ·
    edit-2
    4 months ago

    I swear by my Honeywell Turbo Velocitor. It’s a circulator, fits on a desk, and isn’t exceptionally loud like most other circulators. On just low and angled at a corner, it keeps my bedroom cool and not stuffy by actually having the air move around the entire room. I have had this thing since high school. I graduated in 2003. Longest lasting and absolute best fan I have ever had.

  • MelodiousFunk@slrpnk.net
    link
    fedilink
    English
    arrow-up
    6
    ·
    4 months ago

    Every tower fan I’ve ever owned has been a piece of junk. Which is only a sample size of two but that was enough to put me off of the form factor. Pedestal fans are cheaper and more reliable but take up much more floor space. Anything bought at a big box store is almost guaranteed to have plastic gearing in the oscillator which will eventually start to make noise. No clue if there are “premium” brands that aren’t overpriced bougie bait but I am all ears if anyone has suggestions.

    • Wilzax@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      4 months ago

      Dyson? Not sure how they are today but my old Dyson vacuum still runs really well so they’re doing something right. I know they make fans but I don’t know how long they last

      • wreckedcarzz@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        4 months ago

        I have 3 Dyson fans running right now (24/7), two are towers. One of those was a refurb, testing if they are worth their astronomical price. Had that one since 2016, no problems. Same with the other (newer) two.

        • Wilzax@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          ·
          4 months ago

          I know they’re much pricier than a really cheap fan, but I wonder if they’re reliable enough to be cheaper long-term than buying replacements as the cheap ones break down.

          Still, I’m glad to see a luxury brand is actually high quality for once and not just a fancy coat of pain on the same old disposable crap everyone seems to sell these days

  • Nikls94@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    edit-2
    4 months ago

    I know this sounds silly, but I once needed a cheap fan to blow away the farts in my computer corner (no air circulation there). It was ~€25 I guess (should be the same in $)

    It’s a rotary fan, you can tilt the head and it’s oscillating.

    I moved, but I took it with me and now it circulates the air in the living room.

    7 years later this thing still rocks!

    Here’s the label. It’s pretty quiet and built sturdy, despite being a plastic-bomber.

  • Rade0nfighter@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    4 months ago

    I would recommend getting an adjustable angle oscillating desk fan, but one made of metal (not much difference in price tbh) when you can unclip the front guard to access the blades.

    That way you can wipe the dust off and give the spinning part a blast of WD40 once a year to keep it running nicely for a long time.

    Something like this

    For context about 30cm in diameter. Should cost around €25.

    If you need the height but lack the table space a similar floor fan should do though will probably cost a bit more.

  • SirDerpy@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    3 months ago

    For BIFL you want a full metal cage & blades typically marketed to warehouses. A brushless motor will further extend the life. Buy them used.

    A more effective way is a ceiling fan. Hunter isn’t a high end brand. But, if without a remote and excessive dust it’ll last at least a couple decades.

  • Tazerface@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    4 months ago

    Window fan with removable feet. It can sit on a table, floor, or in the window. The cheap ones have both fans running in the same direction - they suck. Get one with controls for each fan.

    Edit: The brand I’m using is Intertek Model WDF9-2 but I doubt if it’s still being produced, had this thing for years.

  • Zedstrian@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    4 months ago

    After narrowing down the “high velocity” tower fan options on Amazon two years ago to two options that seemed to have the best reviews, I ended up going with the “Dreo Pilot Pro”, ordering two and for some reason being sent three. Anecdotal experience of course, and their use has been largely limited to the summer, but they seem to work a bit better than the Lasko fans they replaced without being distinctly louder. Specific settings probably depend on the exact model one chooses, but the ones I got have nine speed options.