The interior of your house is hot, the exterior cool. What would the most efficient orientation be for a box fan? Pushing hot air out of a window or pulling cool air in through it? (Solved)* - eviltoast

Secondarily, should the fan be outside or inside the window?

Asking for a friend. (Me, help. I can’t remember physics, it’s too goddamn hot)

Edit: I’ve opened all the windows and set up a fan a short distance from the window pointing out and it’s reduced the temperature to near-tolerable levels. Unfortunately, venting through the attic was a no-go but moving things aside might make it an option next time. Thank you all, I appreciate the help!

  • litchralee@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    6 months ago

    I’m not a physicist. But I did live in an apartment at university, and shortness of funds plus hot weather meant experimenting with various box fan configurations.

    What I found most optimal was to open two windows on opposite sides of the dwelling, with the one box fan aimed outward, using cardboard to block the openings around the fan. In my case, the choice of egress (ie air flowing out) window was based on: the window which best fit the box fan’s shape, proximity of noise to the bedroom, and the quality of the window screen.

    As for why the fan points outward, this sends the heat of the motor (60-100 W) out of the dwelling, rather than drawing it in. Also, if facing inward, the high airflow at the tips of the fan blades would tend to draw small flies into the dwelling. But if the fan is at the egress window, then the ingress airflow will average out over the full surface area of the ingress window, producing a lower peak airflow rate, akin to a gentle breeze.

    If you have a multi-floor unit or house, it would be optimal to place the fan at the highest egress window, to take advantage of heat naturally rising. Opening multiple ingress windows will quickly cool those rooms, while also reducing the peak ingress airflow and resulting drafts (eg blowing papers off tables). Of course, it’s necessary to open all the doors to form a path between the ingress and egress windows.