I think the laws need to clarify the difference between just hosting vs suggesting content. Tik Tok should be responsible since it suggested the dangerous video, unlike if it was just hosted on an AWS server.

Poltergeist

No, for that you still need a real broadband adapter.

Yeah the dev will. He always releases cores publicly when they are out of beta.

Also bought mine off AliExpress. It was one of the fake pokemon shell models, so that feels a little cheap but looks nice. Otherwise the unit functions perfectly, no scratches on the screen and buttons are responsive.

Why wait?

https://www.theoaklandpress.com/2023/04/23/riverside-county-sheriffs-investigators-lose-60-pounds-of-meth-in-failed-drug-sting/

https://www.npr.org/2021/10/06/1043651361/oath-keepers-california-sheriff-chad-bianco-january-6-us-capitol

https://ktla.com/news/local-news/deputy-caught-with-100-pounds-of-fentanyl-was-working-for-el-chapos-cartel-report-says/amp/

Well there are tons of 3d printed stands, as well as the classic nail polish stand. Lots of options out there.

Thanks! Found the stands here

Neat, good work!

Flickering like this usually occurs when the controller and lights are not using the same ground.

Built two of these awhile ago. It works very well. https://lemmy.world/post/9910910

There are and they work very well(3ms latency). No mods required . https://shop.insidegadgets.com/product/wireless-gameboy-controller/

Time to get soldering then

Thanks!

Inside

Space and simplicity. There is not a lot of room in a GBA so a custom PCB would probably be needed from the start. Also the DMG display PCB is basically trash if the screen dies, which is all you need for this project. The GBA equivalent would need a donor motherboard.

Thanks. I was looking at these carts and thought about hard it would be to make something similar that you could use a old shell with. I recently made a SNES to Bluetooth adapter so the code was pretty similar. I really like projects that recycle parts like this.

An image of the inside

It’s possible these don’t enter boot mode by default. Try grounding gpio pin 0.

The SNES uses shift registers on the controller. Polling it requires reading the registers to get the current state.