If you are just looking to repurpose an old device for around the house use and it won’t ever be leaving your home network, then the simplest method is to set a static IP address on the device and leave the default gateway empty. That will prevent it from reaching anything other than the local subnet.

If you have multiple subnets that the device needs to access you will need a proper firewall. Make sure that the device has a DHCP reservation or a static IP and then block outgoing traffic to the WAN from that IP while still allowing traffic to your local subnets.

If it is a phone who knows what that modem might be doing if there isn’t a hardware switch for it. You can’t expect much privacy when that modem is active. But like the other poster mentiond a private DNS server that only has records from your local services would at least prevent apps from reaching out as long as they aren’t smart enough to fall back to an IP address if DNS fails.

A VPN for your phone with firewall rules on your router that prevent your VPN clients from reaching the WAN would hopefully prevent any sort of fallback like that.

If you are accessing your files through dolphin on your Linux device this change has no effect on you. In that case Synology is just sharing files and it doesn’t know or care what kind of files they are.

This change is mostly for people who were using the Synology videos app to stream videos. I assume Plex is much more common on Synology and I don’t believe anything changed with Plex’s h265 support.

If you were using the built in Synology videos app and have objections to Plex give Jellyfin a try. It should handle h265 and doesn’t require a purchase like Plex does to unlock features like mobile apps.

Linux isn’t dropping any codecs and should be able to handle almost any media you throw at it. Codec support depends on what app you are using, and most Linux apps use ffmpeg to do that decoding. As far as I know Debian hasn’t dropped support for h265, but even if they did you could always compile your own ffmpeg libraries with it re-enabled.

How can I most easily search my NAS for files needing the removed codecs

The mediainfo command is one of the easiest ways to do this on the command line. It can tell you what video/audio codecs are used in a file.

With Linux and Synology DSM both dropping codecs, I am considering just taking the storage hit to convert to h.264 or another format. What would you recommend?

To answer this you need to know the least common denominator of supported codecs on everything you want to play back on. If you are only worried about playing this back on your Linux machine with your 1080s then you fully support h265 already and you should not convert anything. Any conversion between codecs is lossy so it is best to leave them as they are or else you will lose quality.

If you have other hardware that can’t support h265, h264 is probably the next best. Almost any hardware in the last 15 years should easily handle h264.

When it comes to thumbnails for a remote filesystem like this are they generated and stored on my PC or will the PC save them to the folder on the NAS where other programs could use them.

Yes they are generated locally, and Dolphin stores them in ~/.cache/thumbnails on your local system.

Add a -f to your umount and you can clear up those blocked processes. Sometimes you need to do it multiple times (seems like it maybe only unblocks one stuck process at a time).

When you mount your NFS share you can add the “soft” option which will let those stuck calls timeout on their own.

North Dakota like many states has a renters refund for those with lower incomes which is designed to at least partially offset that. Limits look to be a bit low but every little bit helps.

Here

H2i® models provide heating, even in outdoor temperatures as low as -13° F, producing up to 100% heating capacity at 5° F. These units offer year-round comfort even in extreme climates

Their technical documents show that they are down to about 20% of their usual heat output at that lowest temperature so they need to be sized up accordingly. The reality for most folks in an area cold enough to require these is they have backup heat sources for the coldest days anyways.

It also doesn’t say that the line on the bottom is straight, so we have no idea if that middle vertex adds up to 180 degrees. I would say it is unsolvable.

I’ve got several full color Hue bulbs that are the most used lights in my house. I haven’t had a single failure in a decade.

I was more than a little annoyed when they decided to stop supporting my original controller for them though.

Gerrymandered districts are more in danger not less. Gerrymandering is about spreading out areas which are easy wins, and instead spreading those votes over multiple districts.

You gain more seats, but you make every race closer.

In any KDE app you can connect with SFTP in the open file dialog. Just type sftp://user@server/path and you can browse/open/edit files the remote server. ssh keys+agent make things a lot easier here obviously.

The switches don’t have to control the lights they are wired to. I have Inovelli z-wave switches, and on these you can disable the relay. So the switch can still send out commands/scenes on the network but the relay is always on.

Then you would put in a relay unit in the electrical box of the lights or if you have enough room in with the switches. Then setup the switches to control their respective sets of lights.

Might even be a switch out there that lets you disconnect the relay from the buttons on the switch but still control the relay which would cut down on the device count.

We asked our Dell sales guy this question years ago now, when they had been removed one year and quickly added back the next year.

They are there mostly for government builds, and other places with high security requirements. Usually the requirement is that they need to prevent any unauthorized USB devices from being plugged in. With the PS2 m&k ports they can disable the USB ports entirely in the BIOS.

This was a separate outage unrelated to CrowdStrike a few hours earlier that took down a couple of airlines as well.

A majority of the VMs in the Azure CentralUS datacenter went down due to some sort of backend storage issue.

Edit: I guess I should have read the article they do say CrowdStrike. They seem to be implying that they were one event when the cloud services outage was earlier and unrelated. I had heard about grounded flights during the first outage as well. So they likely are combining the two events here.

I would think most wifi jamming is just deauth attacks. It is much easier to just channel hop, enumerate clients, and send them deauthentication packets.

This way you don’t need a particularly powerful radio/antenna, any laptop/hacking tool with Wi-Fi is all you need. There are scripts out there that automate the whole thing, so almost no deep knowledge of wifi protocols are required.

WPA3 has protected management frames to protect against this but most IoT cameras probably don’t support WPA3 yet.

Updates for CrowdStike are pushed out automatically outside of any OS patching.

You can setup n-1/n-2 version policies to keep your production agent versions behind pre-prod, but other posts have mentioned that it got pushed out to all versions at once. Like a signature update vs an agent update that follows the policies.

This is likely something like a FIDO token/passwordless setup of some sort (i.e. Windows Hello).

The thumbprint would just unlock the hardware device, so the thumbprint itself wouldn’t need to be transmitted to your credit issuer. This gives you full two factor authentication of your identity because you need the hardware device (something you have) and your biometric (something you are). They also often allow pins (something you know) instead of biometrics as the second factor.

One nice thing about KDE compared to most of the other DEs is that the window manager (kwin) is separate from the underlying components, and it can be replaced!

There are many walkthroughs like this one out there: https://github.com/heckelson/i3-and-kde-plasma

You get i3 for tiling window management but you still get to use KDE’s system settings to do configuration like display settings, themes keyboard shortcuts, etc, just like you did before. You can also pick and choose which parts of the KDE desktop you want to keep (menu, krunner, etc)

Since i3 is just a window manager and is lacking all of that system level stuff it really rounds out i3 to feel like a full DE instead of having to piece together other tools to do those things.

It’s presumably to give you legal ground to sue if some corporation scrapes Lemmy content and uses it to train AI, or whatever other commercial purpose.

Hopefully if enough people do it they would consider the dataset too risky to use. They could try and parse out comments that have that license statement but if any get missed somehow they open themselves up to lawsuits.

That would force them to instead pay for content from somewhere that has a EULA forcing the users to hand over copyright regardless of what they put in their posts (i.e. Reddit).

Assuming you mean hot plugged devices (thumb drives and external drives) KDE mounts them under /media

If you are expecting them to auto mount, KDE distros often don’t have that enabled by default. Though I think Kubuntu has that enabled by default now so maybe that has changed. Go to System Settings -> Hardware -> Removable Devices to adjust the automount settings defaults and per drive settings.

If you don’t have automount enabled you probably will need to browse to them in Dolphin once to get KDE to mount the drive first.

There is a free fan made remake of the shooter. https://totemarts.games/games/renegade-x/

Unfortunately while EA seems fine with them distributing this as long as it is free, they won’t allow them to put it on Steam.

I haven’t played it in a couple of years so I don’t know if there are still active servers but it is a very good remake.

That probably would work well for those closer to the equator.

But for those in the 100 minutes zone of this map that would mean going to work at 6:30am in the summer (assuming we are using civil twilight as “sunrise”), and 9:30AM in the winter which is much more of a swing than daylight savings puts on us, but at least it is a gradual one.

For those above the Arctic Circle, they just work 24/7 for a couple of weeks in the summer but get a similar time off in the winter ;)