People have been training great Flux LoRAs for a while now, haven’t they? Is a LoRA not a finetune, or have I misunderstood something?
I am:
@clb92@feddit.dk (MAIN LEMMY PROFILE)
@clb92@mastodon.social (Main Mastodon profile)
@clb92@kbin.social
@clb92@lemmy.world
@clb92@lemmy.ml
And /u/clb92 on Reddit (and many other places)
People have been training great Flux LoRAs for a while now, haven’t they? Is a LoRA not a finetune, or have I misunderstood something?
Jeg har endelig fået set Dredd (2012). Jeg har ikke set originalen med Sylvester Stallone, men den her var god. Jeg kan forstå, der måske kommer en Dredd 2, så den glæder jeg mig til. Det var åbenbart et rygte uden nogen form for bevis.
Jeg spillede det multiplayer med nogle venner for et par måneder siden, og det var godt. Jeg havde slet ikke hørt om det før.
Nope, doesn’t seem like it.
Here’s an example of a text object taken from the XML, if you’re curious: https://clips.clb92.xyz/2024-09-08_22-27-04_gfxTWDQt13RMnTIS.png
EDIT: And with more complicated strings (like ones havingnumbers or symbols - just regular-ass ASCII symbols, mind you) there will be tens of <stringItem>, because apparently numbers and letters don’t even work the same. Even line breaks have their own <stringItem>. And if the number of these <stringItem> and their charLen don’t match what’s actually in pt:data, it won’t open the file.
Lots or file formats are just zipped XML.
I was reverse engineering fucking around with the LBX file format for our Brother label printer’s software at work, because I wanted to generate labels programmatically, and they’re zipped XML too. Terrible format, LBX, really annoying to work with. The parser in Brother P-Touch Editor is really picky too. A string is 1 character longer or shorter than the length you defined in an attribute earlier in the XML? “I’ve never seen this file format in my life,” says P-Touch Editor.
Yeah, you could get hundreds of cheap nozzles for $70. I’ve bought packs of 10 nozzles for 74 cents. That’s almost a thousand nozzles I could get instead of one $70 tungsten one. Or maybe “only” 800 nozzles if I factor in a pessimistic shipping cost too.
EDIT: Checked the price I paid and it was even cheaper than I remember. Edited my calculations.
I haven’t actually tried the Pinecil myself. I do have the Miniware TS80 (not TS80P, so no USB PD support in mine) and these small soldering irons in general are pretty awesome.
and frankly people got really pushy about a thing they don’t even pay for
He doesn’t owe anyone anything, and he can decide to run his open source project just as he pleases, but it could have gone so much better. People are mostly just disappointed, I feel like.
I’ll have you know that I always use the Wii safety strap! Some call me weird for still walking around with that strap so many years after I sold my Wii, but I haven’t broken a single TV since then…
You could fit a small soldering iron in there too, like the Pinecil or TS80P.
Pretty sure you can save them locally, it just requires extra clicks every time, which is super annoying.
deleted by creator
Or in America, “We’re going to sew you back up, but first, please enter credit card details and sign here regarding your payment plan”
What’s the value proposition here? Free no-questions-asked replacement if it breaks? Free upgrades when new models come out (though they have no real incentive to keep developing new “forever mice”)?
If my mice on average last, say, 6 years and cost $175 (I splurged on a high-end one last time), the subscription will have to be less than $2.40/month, and since customers absolutely hate subscriptions, especially if there’s no real benefit, probably even less than $1.50/month for most to even consider it.
In fact the Logitech mouse before my current mouse lasted 12 years and cost me $75, so that’s a max subscription cost of 50 cents/month for it to be comparable.
After trying Phoenix 200, I’m excited to see what else they cook up.
Most slicer software is cross platform, free and open source. The biggest ones are PrusaSlicer, Cura and OrcaSlicer. You can use all of these with lots of different brands of printers. Creality’s own slicer used to just be a slightly modified version of Cura (Not sure if their new “Creality Print” software is, but it doesn’t matter, you’re rarely tied to any specific software, at least with FDM printers). Bambu Lab Studio is not available for Linux, but OrcaSlicer is, and as far as I know it’s just an open source community edition of Studio.
In other words, you’ll have plenty of options on Linux.
I’ve had about 1000+ tabs open before, but I’ve gotten better at keeping them under control. It’s very normal for me to hit a couple hundred, once in a while, though, before I go through them all and weed out the ones I’m done with. Right now I only have 24, but 19 of them are my pinned tabs that are used all the time.
Profitic
Is your title a portmanteau of prophetic and profit?
Oh well, in practice I’ll just continue to enjoy this (possibly forgetful and not-fully-finetunable) model then, that still gives me amazing results 😊