Fellas, is it woke for YouTube to funnel viewers towards pro-fascist videos?

Unfortunately:

However, her veto is only symbolic as the prime minister’s Georgian Dream party has enough members in parliament to override it by holding another vote.

Personally, I’ve yet to see a single American successfully use guns to protect any other constitutional right from government infringement.

The Battle of Athens is probably the most uniquely clear-cut example of what you’re asking for, unless we count the American Revolutionary War itself.

Other successful examples mostly involve activists using non-violent protest to push for change, while using firearms to protect themselves from violent reactionaries that would otherwise murder them. Notably, the civil rights movement of the 1950s and 60s. For a modern example, there’s various “John Brown Gun Clubs” and other community defense organizations providing security at LGBTQ events against fascist groups that seek to terrorize event-goers.

It’s also worth noting that resistance is often worthwhile even if it doesn’t result in unqualified victory. For example, the Black Panthers’ armed cop-watching activities saved a lot of Black folks from brutal beatings at the hands of the police, even if the organization was eventually crushed by the federal government.

I have seen lots of examples like Waco and Ruby Ridge, where the government should have tried harder to deescalate, but in the end, everyone died. The closest example I can think of where the government did backoff was the Bundy standoff and all those guys were “defending” was their ability to let their cattle graze illegally on federal land because they didn’t want to pay for access like everyone else.

It sounds like you might be in a bit of a filter-bubble. I don’t mean any offense by this, it’s a normal thing that tends to happen to people. If the news sources you read and the people you talk to don’t mention these things because it doesn’t mesh with their worldview, how would you hear about them?

Strong gun control requires a police state, and it’s advocates are okay with this. Some of them (mostly suburbanites and the like) just imagine that that police state will never be directed against them.

Others are capitalists that actively want to inflict a police state on the rest of us, for their own benefit. It’s a lot easier to break strikes and enforce “work discipline” when the working class is disarmed.

Food Courts Martial

Are there any physical obstructions between the controller and the antenna? That’d reduce the effective range.

Ancaps: Government is bad because tyranny, we should get rid of it.

Also Ancaps: Here’s how we can still enforce copyright, abortion bans, and racial segregation without a government! 🥰

• Day 23, part 2 rewrite

Nim

Part 1 was just a simple search. Part 2 looked like it just needed a trivial modification, but with the removal of the one-way tiles, the result I was getting was getting for the example was too large. I switched to a different method of determining the path length, but didn’t yet figure out what what I had been doing wrong. Since the search space was now significantly larger, my part 2 code took almost an hour to come up with the answer.

I rewrote part 2 to simplify the maze into a graph with a node for each intersection and for the start and goal tiles, with edge costs equal to the path length between each. This resulted in significantly faster iteration (17 seconds instead of 52 minutes), but didn’t actually reduce the search space. I’m assuming there’s some clever optimization that can be done here, but I’m not sure what it is.

The rewrite was still getting the wrong answer, though. I eventually figured out that it was including paths that didn’t actually reach the goal, as long as they didn’t revisit any nodes. I changed my recursive search function to return a large negative result at dead ends, which fixed the issue.

• Day 23, part 1
• Day 23, part 2

Nim

I sorted the bricks by their lower Z coordinate, then tried to move each of them downward, doing collision checks against all the others along the way. Once a level with collisions was found, I recorded each colliding brick as a supporter of the falling brick.

For part 1, I made another table of which other bricks each brick was supporting. Any bricks that weren’t the sole support for any other bricks were counted as safe to disintegrate.

For part 2, I sorted the bricks again after applying gravity. For each brick, I included it in a set of bricks that would fall if it were removed, then checked the others further down the list to see if they had any non-falling supporters. Those that didn’t would be added to the falling set.

Initially I was getting an answer for part 2 that was too high. I turned out that I was counting bricks that were on the ground as being unsupported, so some of them were getting included in the falling sets for their neighbors. Adding a z-level check fixed this.

Both of these have room for optimization, but non-debug builds run 0.5s and 1.0s respectively, so I didn’t feel the need to write an octree implementation or anything.

• Day 22, part 1
• Day 22, part 2

Nim

My part 2 solution assumes the input has an unimpeded shortest path from the center of each garden section to its corner, and to the center of its neighbor. The possible destinations will form a diamond pattern, with “radius” equal to the number of steps. I broke down the possible section permutations:

• Sections that are completely within the interior of the diamond

  • Even number of sections away from the starting section
  • Odd number of sections away from the starting section

• Sections containing the points of the diamond

• Depending on the number of steps, there may be sections adjacent to the point sections, that have two corners outside of the diamond

• Edge sections. These will form a zig-zag pattern to cover the diamond boundary.

  • “Near” edge sections. These are the parts of the zig-zag nearer to the center of the diamond.
  • “Far” edge sections. These won’t occur if the edge of the diamond passes perfectly through the corners of the near edge sections.

I determined how many of each of these should be present based on the number of steps, used my code from part 1 to get a destination count for each type, and then added them all up.

• Day 21, part 1
• Day 21, part 2

Nim

Another least common multiple problem. I kinda don’t like these, as it’s not practical to solve them purely with code that operates on arbitrary inputs.

• Day 20, part 1
• Day 20, part 2 partial solution
• Day 20, part 2 answer

Yeah, I laughed at that bit. Big “I am not a member of the National Socialist German Worker’s Party” energy.

Nim

Part 1 was pretty straightforward. For part 2 I made an ItemRange type that’s just one integer range for each attribute. I also made a split function that returns two ItemRange objects, one for the values that match the specified rule, and the others for the unmatched values. When iterating through the workflows, I start a new recursion branch to process any matching values, and continue stepping through with the unmatched values until none remain or they’re accepted/rejected.

• Day 19, part 1
• Day 19, part 2

Yeah, I read up on ear clipping for a small game dev project a while back, though I don’t remember if I actually ended up using it. So my solution is inspired by what I remember of that.

Yep, I figure it’s good exercise to make me think through the problems thoroughly.

Shoelace formula

This would have been really useful to know about. I’ve committed to a certain level of wheel-reinvention for this event unless I get really stuck, but I’m sure it’ll come up again in the future.

• Day 18, part 2

Nim

I am not making good time on these anymore.

For part 1, I walked through the dig plan instructions, keeping track of the highest and lowest x and y values reached, and used those to create a character grid, with an extra 1 tile border around it. Walked the instructions again to plot out the trench with #, flood-filled the exterior with O, and then counted the non-O tiles. Sort of similar to the pipe maze problem.

This approach wouldn’t have been viable for part 2, due to the scale of the numbers involved. Instead I counted the number of left and right turns in the trench to determine whether it was being dug in a clockwise or counterclockwise direction, and assumed that there were no intersections. I then made a polygon that followed the outer edge of the trench. Wherever there was a run of 3 inward turns in a row, that meant there was a rectangular protrusion that could be chopped off of the main polygon. Repeatedly chopping these off eventually turns the polygon into a rectangle, so it’s just a matter of adding up the area of each. This worked great for the example input.

Unfortunately when I ran it on the actual input, I ran out of sets of inward turns early, leaving an “inside out” polygon. I thought this meant that the input must have intersections in it that I would have to untwist somehow. To keep this short, after a long debugging process I figured out that I was introducing intersections during the chopping process. The chopped regions can have additional trench inside of them, which results in those parts ending up outside of the reduced polygon. I solved this by chopping off the narrowest protrusions first.

• Day 18, part 1

The rest of the code:

• Day 17, part 2 (24-48 hours)
• Day 17, part 2 rewrite (115ms)