Gormadt@lemmy.blahaj.zone to 3DPrinting@lemmy.worldEnglish · 1 year agoBe honest folks, how bad are y'all's resin build plates?files.catbox.moeimagemessage-square22fedilinkarrow-up166arrow-down12file-text
arrow-up164arrow-down1imageBe honest folks, how bad are y'all's resin build plates?files.catbox.moeGormadt@lemmy.blahaj.zone to 3DPrinting@lemmy.worldEnglish · 1 year agomessage-square22fedilinkfile-text
minus-squareGormadt@lemmy.blahaj.zoneOPlinkfedilinkEnglisharrow-up1·1 year agoNo sharp protrusions that could puncture or damage the screen or vat. So I say flat. I was never successful using a plastic spatula so I used a metal one
minus-squareanlumo@lemmy.worldlinkfedilinkEnglisharrow-up2arrow-down1·1 year agoThe trick is to include a wedge in the base of the print, then you don’t need much force. The standard base plate generated by ChiTuBox does have one already.
No sharp protrusions that could puncture or damage the screen or vat. So I say flat.
I was never successful using a plastic spatula so I used a metal one
The trick is to include a wedge in the base of the print, then you don’t need much force. The standard base plate generated by ChiTuBox does have one already.