Report: Consumer Hardware Still Often Impossible To Repair Despite New State ‘Right To Repair’ Laws - eviltoast
  • The U.S. Public Interest Research Group (PIRG) examined 21 different mainstream tech devices subject to New York’s recently passed electronics Right to Repair law, and found mixed results:

    • 9 devices earned A’s or B’s (including all smartphones)
    • 3 products received D’s
    • 6 popular mainstream devices earned F’s
  • The devices that fared poorly, like the HP Spectre Fold laptop, Canon EOS r100 camera, and Apple Vision Pro/Meta Quest 3 VR headsets, usually lacked spare parts or useful repair manuals.

  • While New York’s law requires manufacturers to provide tools, manuals, and parts for affordable, easy repair, PIRG says the law has been watered down with loopholes, and there has been no enforcement action taken despite numerous companies failing to comply.

  • The cellphone sector has made significant strides in repairability, but other sectors like VR headsets and cameras still have major issues.

  • 30 states are considering “right to repair” legislation in 2024, but these bills are at risk of being weakened by industry lobbyists.

    • NuXCOM_90Percent@lemmy.zip
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      5
      ·
      5 months ago

      Then learn how to prop up your car and work on it yourself?

      Like, that is the reality of it. Headlight bulbs aren’t going to change themselves if you wish really hard. Same with a flat tire. So you either learn how to do it (preferably before you are in the mud on the side of i-95 in the rain) or you pay someone.

      The reason why Right to Repair laws are so good in concept (if not execution) is that it means you aren’t paying Toyota to come change your tire for you. You are paying a local mechanic who is theoretically not ripping you off.

      • snooggums@midwest.social
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        5 months ago

        There are tons of cars that have been designed to be easy to work on. I have worked on my own cars for over three decades. Every vehicle I have owned allowed the headlight bulbs to be reached by opening the hood. Well, I might need to check my new one because I haven’t needed to yet since it has LEDs.

        There is no reason to excuse poor maintenance design as some kind of unavoidable necessity.

        • NuXCOM_90Percent@lemmy.zip
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          3
          ·
          5 months ago

          Yes. And over the past three decades there have been a lot of advancements and improvements as well as a general push for larger engines for both efficiency and “number go up” horsepower. Also structural design to increase safety in the event of a collision.

          The reality is that there has always been stuff you can repair just by popping a hood and stuff you need to prop it up for. And there have always been people who decide to reach under the car to drain the oil and pollute their local sewers.

          Any form of engineering is a trade off. And if you compare “under the hood” for a car from the 90s versus one from the 2020s, it is going to look a lot more packed. And, at some point, having super easy panels to open up once or twice over the lifespan of a vehicle is just not a priority for anyone other than someone on the internet looking for something to be angry about.

          When it is a case of needing to go in for maintenance to re-approve all my parts? Fuck that noise (also why anyone who ever plans to do electrical work should get one of those code readers to reset the error light…). When it is me being expected to do something incredibly basic like “prop up the car and remove a wheel”? If you aren’t comfortable doing that then you aren’t comfortable “working on” your car.

          • jwiggler@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            2
            ·
            5 months ago

            If you aren’t comfortable doing that then you aren’t comfortable “working on” your car.

            You’ve written a whole lotta junk to essentially end on, “if you can’t jack up your car and remove the wheel, you shouldn’t be changing your headlight in the first place.”

            Which is quite a dumb take.

            • jmp242@sopuli.xyz
              link
              fedilink
              English
              arrow-up
              3
              ·
              5 months ago

              I mean, most people don’t think ease of changing a light bulb (that they never have to do) is a deal breaker for a car. I haven’t had to change a headlight since they went to LEDs. My last car that was 7 years of owning it.

              I think we should insist on making things repairable, but should focus on the things that come up frequently.

              Because everything is a tradeoff, things like how often it is likely to need repair, how much the car costs, functionality of the car day to day, looks, gas mileage, heck a lot of stuff will come before a once a decade thing that you’re either going to pay a shop to do or trade before it’s an issue.