without using special tools like respin and archiso
What do you exactly mean with this?
Can we suggest any package/tool that you have to install?
Did you intend to convey a solution that’s independent of an existing distro?
Do you want the custom distro/iso to only do its thing until installation? Or are you perhaps interested in something more declarative that can continue to exist and be (one of) the primary means to config your system?
Could you explain to us how your envisioned solution looks like?
Sorry for asking these questions, but it was either this or a very very long post satisfying all kinds of different criteria. Thanks you in advance for answering any of the questions!
I’ve been struggling to make a bootable iso. I did Linux from scratch and I wanted to boot it in virtual box. I found a sparse amount of info about mkisofs/genisofimage but I couldn’t actually get a successful boot after following a few tutorials.
I have to imagine there are more modern tools for something like this but I didn’t have any luck googling.
Sorry to hijack but it sounds like you might have an answer I need. I just want a way to put together an iso with a bootloader that works in virtual machines. (I’m good with 32bit grub but I’d work with uefi too).
Would you be fine with some tooling that enables one to make their own custom iso from an existing distro? This path still allows for a substantial amount of freedom, though it’s not a blank slate by any stretch of the imagination. But it makes up for it with how relatively easy and painless it can be.
Or would you instead like to get into the nitty-gritty of things and want all the freedom you’d want? This increased freedom does come with a substantial cost in convenience and labour.
So taking your other comment into consideration as well, I suppose the following would be the easiest good setup:
Install Debian Stable using the image for a minimal network install onto a secondary device or onto a partition of your main device (multi-boot). Make sure to only include the stuff you think you’d need.
Install all of your favorite tools within that Debian Stable installation.
Use the excellent penguins-eggs package to make a live image out of it.
Install the live image onto your favorite USB with whichever tool you like; personally I enjoy using ventoy.
Profit :P .
If my proposed solution doesn’t quite fit your needs, then please feel free to correct me!
I assume getting a persistent environment in a USB recovery stick is a bigger task? I’m imagining that, with your method, I would need to repeat this process any time I wanted to update the image or load specific new kernel modules/drivers?
I assume getting a persistent environment in a USB recovery stick is a bigger task?
I actually don’t know if penguins-eggs allows persistent environments 🤔 . Though, other tools might be better fit for the job. Personally I’d recommend you to follow this guide for openSUSE Leap. A similarly good guide/documentation for Debian is absent, and openSUSE Leap is likewise a good fit due to it being supported over a longer time period as well. The steps outlined in the guide might be a bit more involved, but the team behind openSUSE have done a wonderful job to ensure accessibility.
I’m imagining that, with your method, I would need to repeat this process any time I wanted to update the image or load specific new kernel modules/drivers?
With the method outlined in my previous comment, you only have to repeat the process from scratch if you didn’t save the Debian install some way or another. If you did keep the Debian install around, then you could just; open it up, apply some updates/changes or (un)install additional packages and make yet another live image out of it. Granted, the openSUSE Leap persistent Live USB that has been previously mentioned in this comment is easier to change later down the line regardless.
Btw, -to my knowledge- the persistent Live USB environment is also possible on other distros like Debian, Fedora, Ubuntu etc. So arguably it’s best to first look at which distro satisfies your needs in regards to package availability. After which, in my opinion, LTS/Stable releases ought to be preferred over the others.
Going to try the penguins-eggs method you posted. I would love to be able to turn a virtual box environment into an installable medium to make my own version of debian with all my gnome tweaks.
I would also love a solution that doesn’t require booting into the OS first. So that I can take a root dir and turn it into a bootable iso. I tried a bunch of old tutorials for making a boot.iso and linking it into mkisofs with -b but it never worked.
I am willing to learn/use any free tooling. Not picky at all.
Going to try the penguins-eggs method you posted. I would love to be able to turn a virtual box environment into an installable medium to make my own version of debian with all my gnome tweaks.
Good choice! The “penguins-eggs method” should fit the bill ;) !
I would also love a solution that doesn’t require booting into the OS first. So that I can take a root dir and turn it into a bootable iso.
Few questions :P :
If I understood you correctly, you mean that all of the files that will make up the bootable iso are contained -presumably under FHS- within a root dir of another distro? Or did you mean it as a partition? Or did you mean any tool that can build your iso from within another system based on (declarative) instructions?
Are we still talking about Debian with all your GNOME tweaks?
Is Debian a hard requirement? Or would you be open to say something like Fedora?
Is Live USB a hard requirement?
Might seem random, but what’s your stance on declarative distros?
I tried a bunch of old tutorials for making a boot.iso and linking it into mkisofs with -b but it never worked.
Small nitpick; I generally recommend using xorriso over mkisofs, the latter is only packaged in most distros as part of xorriso anyways*. While genisoimage does ‘provide’ mksisofs as well, genisoimage is unmaintained and should therefore not be used.
As for xorriso I have a LFS dir that very much resembles a Linux root dir (without a DE or any distro specific software) and I can chroot into it mounting /dev, /sys, /run, /proc from my host system.
I would like to compress that LFS dir into an iso combined with a boot loader.
That LFS dir is on a separate partition and does have a boot loader installed on that partition’s hard drive. But I’d rather boot it in a virtual machine and I didn’t want to give the vm raw hard drive access.
I hope that helps but I’m happy to answer more questions.
Booting into a live CD isn’t a hard requirement because I can probably just use eggs
after I get it to boot in a vm.
Edit: also thanks for the insight about xorriso I had real trouble finding much info about the differences between the three.
Edit 2: I’m going to run LFS on the exact same hardware it compiled on so I can probably use grub installed on my host system.
That said I did try using grub-mkimage on my host system and when passing that iso into mkisofs -b I still couldn’t get a boot. (No bootable medium found.)
Thanks for answering! Now I’ve got a better picture of what you’re trying to achieve. However, unfortunately, I’ve yet to dabble into LFS. So I’m afraid that I might not be that helpful 😭. Wish you the best of luck though!
The official manual page for xorriso is probably the best place to start. Unfortunately it mostly glosses over how it’s compatible with mkisofs and doesn’t further delve too much into what mkisofs does and thus how to engage with the -b flag. Fortunately, that information can be found on the related manual page for xorrisofs.
Please feel free to notify me if I can be of further help :blush: !
What do you exactly mean with this?
Sorry for asking these questions, but it was either this or a very very long post satisfying all kinds of different criteria. Thanks you in advance for answering any of the questions!
I’ve been struggling to make a bootable iso. I did Linux from scratch and I wanted to boot it in virtual box. I found a sparse amount of info about mkisofs/genisofimage but I couldn’t actually get a successful boot after following a few tutorials.
I have to imagine there are more modern tools for something like this but I didn’t have any luck googling.
Sorry to hijack but it sounds like you might have an answer I need. I just want a way to put together an iso with a bootloader that works in virtual machines. (I’m good with 32bit grub but I’d work with uefi too).
Would you be fine with some tooling that enables one to make their own custom iso from an existing distro? This path still allows for a substantial amount of freedom, though it’s not a blank slate by any stretch of the imagination. But it makes up for it with how relatively easy and painless it can be.
Or would you instead like to get into the nitty-gritty of things and want all the freedom you’d want? This increased freedom does come with a substantial cost in convenience and labour.
Pick your poison :P . I’ll be waiting ;) .
Customizing a base distro sounds like a good place to start 👍🏽
So taking your other comment into consideration as well, I suppose the following would be the easiest good setup:
If my proposed solution doesn’t quite fit your needs, then please feel free to correct me!
This sounds like a perfectly workable solution!
I assume getting a persistent environment in a USB recovery stick is a bigger task? I’m imagining that, with your method, I would need to repeat this process any time I wanted to update the image or load specific new kernel modules/drivers?
Good questions!
I actually don’t know if penguins-eggs allows persistent environments 🤔 . Though, other tools might be better fit for the job. Personally I’d recommend you to follow this guide for openSUSE Leap. A similarly good guide/documentation for Debian is absent, and openSUSE Leap is likewise a good fit due to it being supported over a longer time period as well. The steps outlined in the guide might be a bit more involved, but the team behind openSUSE have done a wonderful job to ensure accessibility.
With the method outlined in my previous comment, you only have to repeat the process from scratch if you didn’t save the Debian install some way or another. If you did keep the Debian install around, then you could just; open it up, apply some updates/changes or (un)install additional packages and make yet another live image out of it. Granted, the openSUSE Leap persistent Live USB that has been previously mentioned in this comment is easier to change later down the line regardless.
Btw, -to my knowledge- the persistent Live USB environment is also possible on other distros like Debian, Fedora, Ubuntu etc. So arguably it’s best to first look at which distro satisfies your needs in regards to package availability. After which, in my opinion, LTS/Stable releases ought to be preferred over the others.
Thanks a ton for all the advice! 👍🏼
It has been my pleasure! I’m curious on what you’ll end up doing. So please consider to report back if it isn’t too much to ask :blush: !
Going to try the penguins-eggs method you posted. I would love to be able to turn a virtual box environment into an installable medium to make my own version of debian with all my gnome tweaks.
I would also love a solution that doesn’t require booting into the OS first. So that I can take a root dir and turn it into a bootable iso. I tried a bunch of old tutorials for making a boot.iso and linking it into mkisofs with -b but it never worked.
I am willing to learn/use any free tooling. Not picky at all.
Good choice! The “penguins-eggs method” should fit the bill ;) !
Few questions :P :
Small nitpick; I generally recommend using
xorrisoovermkisofs, the latter is only packaged in most distros as part ofxorrisoanyways*. Whilegenisoimagedoes ‘provide’mksisofsas well,genisoimageis unmaintained and should therefore not be used.So eggs is great for Debian with my Gnome stuff.
As for xorriso I have a LFS dir that very much resembles a Linux root dir (without a DE or any distro specific software) and I can chroot into it mounting /dev, /sys, /run, /proc from my host system.
I would like to compress that LFS dir into an iso combined with a boot loader.
That LFS dir is on a separate partition and does have a boot loader installed on that partition’s hard drive. But I’d rather boot it in a virtual machine and I didn’t want to give the vm raw hard drive access.
I hope that helps but I’m happy to answer more questions.
Booting into a live CD isn’t a hard requirement because I can probably just use eggs after I get it to boot in a vm.
Edit: also thanks for the insight about xorriso I had real trouble finding much info about the differences between the three.
Edit 2: I’m going to run LFS on the exact same hardware it compiled on so I can probably use grub installed on my host system.
That said I did try using grub-mkimage on my host system and when passing that iso into mkisofs -b I still couldn’t get a boot. (No bootable medium found.)
Thanks for answering! Now I’ve got a better picture of what you’re trying to achieve. However, unfortunately, I’ve yet to dabble into LFS. So I’m afraid that I might not be that helpful 😭. Wish you the best of luck though!
Alright thanks. Well if you know of any good resources for xorriso particularly with the -b (boot) flag I’d like to read them.
Google has been mostly serving me 15 year old SO posts that aren’t relevant to modern Linux anymore.
The official manual page for
xorrisois probably the best place to start. Unfortunately it mostly glosses over how it’s compatible withmkisofsand doesn’t further delve too much into whatmkisofsdoes and thus how to engage with the-bflag. Fortunately, that information can be found on the related manual page forxorrisofs.Please feel free to notify me if I can be of further help :blush: !