EPYC for Desktop: It's finally here! (and cheap too) - eviltoast
    • Blue_Morpho@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      Could be but finding a motherboard that has verified ECC is tricky. Most say works but not tested/supported so you’re on your own to figure out if ECC fully works.

      • narc0tic_bird@lemm.ee
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        6 months ago

        The server/workstation focused ASRock Rack AM5 mainboards list plenty of ECC modules in their QVL. The “gaming-focused” ASUS B650E-E I’m using even has two ECC modules listed in its QVL.

        So you could’ve already gotten verified ECC support, the fact that the same CPUs now exist with a different (EPYC) branding doesn’t change that. Finding these mainboards isn’t particularly tricky either.

          • narc0tic_bird@lemm.ee
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            6 months ago

            “ASRock” and “ASRock Rack” are two different series of motherboards.

            Here’s the QVL of one of their AM5 mainboards: https://www.asrockrack.com/general/productdetail.asp?Model=B650D4U-2L2T/BCM#Memory - it doesn’t limit these modules to specific CPUs. All CPUs with ECC compatibility also support these modules on this mainboard. Some of these Rack boards are over a year old, and they always had some ECC modules on their QVL. This - again - isn’t EPYC 4004 specific, they couldn’t have validated it with EPYC 4004 CPUs a year ago. In fact, their CPU support list doesn’t even list EPYC 4004 CPUs as of today, as they haven’t released a BIOS update adding (official) compatibility in for these CPUs (it will probably be released shortly though).

            ASRock Rack AM4 mainboards also officially support ECC memory. So if you wanted verified ECC support on a comparatively cheap AMD platform you could’ve always gone for one of these boards with a regular Ryzen CPU (not an APU). The boards are a bit on the expensive side but if you want official support (for whatever reason you’d need that in a homelab environment) you can get it.

            • Blue_Morpho@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              6 months ago

              I’ve read there is an id pin on Epyc cpus that differentiates them from Ryzen. Der8aur made it work by masking the pin on the socket.