Edit: I have added the share name at the end of the IP address and now I’m getting mount error(115): Operation now in progress. I haven’t figured this one out yet either. My computer IP and the network drive IP are on the same network and within range. Both should be using the same gateway and DHCP.
I have tried just about every combination of parameters possible and nothing is working. It keeps spitting out a meaningless error and that error is the only thing in the log file too. I have tried a 100 different answers from across stack-overflow to no avail.
I’m running the command below:
sudo mount -t cifs //192.168.50.1/ /mnt/asus -o credentials=/home/user/.smbcredentials
and regardless of how many params I have removed it keeps spitting out :
mount error(22): Invalid argument Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg)
I have referred to the manpage and verified that all of the args I’m using are valid. At this point I’m kind of at a loss. Are there file system args I need to add or something?
I can see the disk with all of the sharenames when I run smbclient -L 192.168.50.1, and I can navigate to it in the file browser, but I can’t mount it for some reason. I have the workgroup name set under /etc/samba/smb.conf. I have tried enabling and disabling NT1. Does anyone have any ideas as to why it might be spitting out an invalid args error even when I removed every single argument?
OK, you may want to check
dmesgorjournalctlif there are further errors from the kernel - there is also a-vargument formount, egmount -t cifs -v //SERVER/$share /mnt --verbose -o...that might help.Don’t know if you’ve found this already (and apologies if you have!) but this suggests some not obvious solutions https://superuser.com/questions/430163/cifs-share-mount-errors
Also (brain dumping) if you’ve successfully mounted it via the file browser, do so again and then check
mountto see what arguments/options the CIFS mount is using - it might yield some important differences.Thanks! That last option is something I thought of too, but I didn’t know what to do to get that information. I tried properties in the file explorer, but that didn’t work. Do I just type
mountinto the terminal to get a list of mounts? I’ll definitely try all of this after work. For now I’m exhausted from staying up until 1:30 am trying to get this figured out.Sorry, I was thinking file browser mounts would appear in
mount, but they don’t.You should be able to list file browser mounts in a terminal using
gio mount -liafter mounting via the file browser, and it will list the SMB mount it’s using, iesmb://SERVER/$share/This annoyingly doesn’t give us the username or domain for the SMB share, and to get that if the server and share looks OK we have to run
gvfs(what the file browser for PopOS uses in the background) in debug mode and re-mount the SMB share; in a terminal runpkill gvfs; pkill nautilus; LANG=C GVFS_DEBUG=1 $(find /usr/lib* -name gvfsd 2>/dev/null) --replace 2>&1; this will unmount anything in the file browser but will show what username and domain the file browser is using to access the SMB share, for example after clicking on a share in the file browser, among other logs, I get;smb: do_mount - URI = smb://absolution.local/samshared smb: do_mount - try #0 smb: auth_callback - kerberos pass smb: auth_callback - out: last_user = 'samblack', last_domain = 'SAMBA' smb: do_mount - [smb://absolution.local/samshared; 0] res = -1, cancelled = 0, errno = [22] 'Invalid argument' smb: do_mount - enabling NTLMSSP fallback smb: do_mount - try #1 smb: auth_callback - ccache pass smb: auth_callback - out: last_user = 'samblack', last_domain = 'SAMBA' smb: do_mount - [smb://absolution.local/samshared; 1] res = -1, cancelled = 0, errno = [22] 'Invalid argument' smb: do_mount - try #2 smb: auth_callback - normal pass smb: auth_callback - reusing keyring credentials: user = 'samblack', domain = 'ABSOLUTION' smb: auth_callback - out: last_user = 'samblack', last_domain = 'ABSOLUTION' smb: do_mount - [smb://absolution.local/samshared; 2] res = 0, cancelled = 0, errno = [0] 'Success' smb: do_mount - login successful smb: send_reply(0x55ea6ffe5450), failed=0 ()This should give the username and domain that connects and can be used in the credential file.
Once this is done, you can exit the terminal with
gvfsrunning and you should be able to close and re-open the file browser and the mounts should just re-appear normally.Hopefully this will give enough information as to why the file browser mount works and the
mountcommand doesn’t.This is amazing! Thank you very much. I’ll try this out tonight and hopefully get somewhere with it. I’ll let you know either way. Thanks again!