I left the cover off a tower PC and walked away while it installed linux (yes, bad idea). The cover had the cpu fan mounted on it but the CPU also had a fan strapped on it. I don’t know if the CPU-mounted fan was running or if the machine was entirely dependent on the cover-mounted fan directly above the cpu.
Someone junked this PC (asus p5b) simply because it’s old (2007). Seems like a high-end gaming machine designed for overclocking. Strangely, when I returned to the machine to find it powered off, I felt the heatsink and it did not feel warm at all. Power supply is apparently fine because a green LED on the motherboard is lit. When I press the power-on button the HDD LED flashes for a split second but nothing happens.
I thought if CPUs get too hot there is a protection mechanism to force a power off. Was that the case in 2007? The manual mentions this:
CPU TM function [Enabled] Allows you to enable or disable the CPU internal thermal control function. In TM mode, the CPU power consumption is reduced. Configuration options: [Disabled] [Enabled]
Would that setting cause a protective shutdown? I don’t know how that was set.
thanks for the tip… i would not have thought CMOS values would cause this but it’s worth a try. Note that there is a CMOS clearing jumper so I guess I’ll try that first.
UPDATE: I tried your procedure as well as the procedure in the manual and it made no difference. The manual said unplug and remove the battery, then move the jumper for 5-10 secs, then move it back. I guess the jumper is analogous to holding down the power button.
It was a long shot. Good luck.
That jumper is what we had back then for a “clear cmos” button.
I’ve never seen a clear CMOS button… is that what modern boards have now?
Yup, the higher end ones even have it next to the io on the back.