TIL about “passive houses,” building that are airtight and require barely any energy to heat or cool - eviltoast
  • dlpkl@lemmy.world
    link
    fedilink
    English
    arrow-up
    12
    ·
    1 year ago

    So from the article it seems that when the passive air vents are closed the total flow of air is supposed to be less than 10m³/hm². The air flow that occurs during the test is from cracks and leaks in the fixtures and doors. Calling it airtight might be confusing since people assume that would mean zero net flow.

    • TDCN@feddit.dk
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      2
      ·
      edit-2
      1 year ago

      I can see that might being confusing if you are not used to it, but houses are build to be “as airtight as practically posible” of course you could never bild a normal hous as airtight as a spaceship, but if you look at windows doors etc of a passive house you’d see rubber gaskets and seals everywhere. New tech keeps coming up. All houses since early 2000 here are required to have an inner airtight membrane and there are strict requirements about how to apply it. All seams, corners and nail holes etc. must be taped with special membrane tape. In theory the only holes in the house should be the ventilation system. I’m my current apartment even the kitchen hood is connected to the ventilation system so when it runs and an even amount of air is being exhausted and injected back into the house to avoid any pressure differential, minimizing leaks from the inevitable tiny leaks here and there. Airtight is the goal and we are damn close. Many houses are also better than the standards to account for small leaks over time.