The reduced airspeed of the shit particles thanks to the closed lid slows the buildup of shit particles on bathroom surfaces enough for my regular cleaning to be sufficient
This would be a good experiment for Myth busters. I’d imagine that with the lid closed the increase in pressure would not be significant and the air particles would be accelerated more horizontally as opposed to vertically. This would, theoretically, cause them to accumulate more on surfaces below countertop level than above.
How does flushing water create air pressure? Are you using a steam toilet? Are you acoustic?
Did you just try to call me dumb when you don’t understand physics?
Here’s a little science experiment and explanation for you:
Water in a toilet bowl first rises as the flush begins before it over comes the pressure in the drain trap. Close the lid, more air is squeezed out the sides of the toilet for a moment as that happens, leave the lid up and you have a larger volume for the air to be offset in. Don’t believe me, flush the toilet with the lid down, wet a finger with water slightly and put it near the opening between the lid and the bowl, you will feel it cool down from the air escaping. Do the same now with the lid open and you will notice this effect less. Obviously do this with a clean toilet and wash your hands afterwards but you will notice the pressure difference in the beginning.
I just did this experiment with a lighter held next to the seat gap, which is a simple but sensitive test of boundary air displacement, and there was zero movement. This is complete nonsense.
The reduced airspeed of the shit particles thanks to the closed lid slows the buildup of shit particles on bathroom surfaces enough for my regular cleaning to be sufficient
The closed lid increases air speed, not decreases it as you create a higher build up of pressure 🤦♂️
This would be a good experiment for Myth busters. I’d imagine that with the lid closed the increase in pressure would not be significant and the air particles would be accelerated more horizontally as opposed to vertically. This would, theoretically, cause them to accumulate more on surfaces below countertop level than above.
But I have no data to support this hypothesis.
They did test it years ago lol and confirmed that closing the lid did not have a benefit.
How does flushing water create air pressure? Are you using a steam toilet? Are you acoustic?
Did you just try to call me dumb when you don’t understand physics?
Here’s a little science experiment and explanation for you:
Water in a toilet bowl first rises as the flush begins before it over comes the pressure in the drain trap. Close the lid, more air is squeezed out the sides of the toilet for a moment as that happens, leave the lid up and you have a larger volume for the air to be offset in. Don’t believe me, flush the toilet with the lid down, wet a finger with water slightly and put it near the opening between the lid and the bowl, you will feel it cool down from the air escaping. Do the same now with the lid open and you will notice this effect less. Obviously do this with a clean toilet and wash your hands afterwards but you will notice the pressure difference in the beginning.
I just did this experiment with a lighter held next to the seat gap, which is a simple but sensitive test of boundary air displacement, and there was zero movement. This is complete nonsense.
Sosca the Science Guy!