No longer able to Plug 2 switches into Router? - eviltoast

I have been running my home network for 8 years without issue. Then around 11:30PM on Saturday, i got a notification that my SmartThings home hub had disconnected. Didn’t think anything of it until Sunday when I noticed my MyQ Garage Hub also was also no longer connected.

The Samsung Hub is plugged into an Unmanaged PoE switch (Switch 1) that plugs into the Router along with a PoE camera that was unavailable thru the app. The MyQ Garage Hub is plugged into another unmanaged switch (Switch 2), that plugs into the router was also showing Offline. The Router also has a wired AP Access point (Another Router that is in AP mode) that has some Wireless Camera’s which were online.

Any device that was in either Switch 1 or 2, showed lights flashing on the Ethernet ports, but could not be pinged OR available from the apps on my phone. Started messing around troubleshooting and after I unplugged Switch 2, everything on Switch 1 would work as well as everything that was connected to the AP.

I ordered a new unmanaged switch to replace Switch 2, since I thought that Switch 2 went bad. After I plugged Swtich 2 into the Router, everything on Switch 1 could connect for about 30 seconds and then would show offline (no camera or Smartthing Hub).

I am not sure what is going on, since I did not update Router Firmware or make any changes to the network for months and now it seems that I can’t plug two switches into the router. Any ideas of what else I can try?

  • TheEthyr@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Maybe you didn’t change anything on the network but something may have changed on its own. A firmware update could have altered the network settings on a device, such as the MyQ Garage Hub. Maybe it changed its IP address and caused a conflict with the router’s IP address. You could check the IP address assignments in the router or the logs.

    • Divazio@alien.topOPB
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Absolutely could be. I will try to trigger the issue and look at the logs.