I have a 220 volt outlet, my PSU supports 115-240v, but the plug is only a standard 120v plug. How doninokug it in? - eviltoast

The plug side that goes into the PSU is not standard.

The PSU is an EVGA 1600 G2 supernova.

How do I plug this in? I can’t find a compatible cable or plug adapter.

  • notfromhere@lemmy.oneEnglish
    1·
    1 year ago

    Sorry I meant your power outlet. The outlet on the PSU is standard for 220v from what I know

      • average650@lemmy.worldOPEnglish
        1·
        1 year ago

        It looks like I need a 6-15P to IEC C19 cable. I guess 14 gauge should be sufficient.

        Edit: Wait…It might be 6-30… That’s way harder to find.

        • notfromhere@lemmy.oneEnglish
          1·
          1 year ago

          Yea I can’t help you there. That NEMA 6-30P is going to be tough to utilize for this and could be dangerous. Good luck on your hunt. My only suggestion is maybe fine a PDU that could go between. I do not recommend making your own cable.

          • average650@lemmy.worldOPEnglish
            1·
            1 year ago

            Could I not use a 6-30P to 6-15R adapter? My computer will blow up before that amperage becomes and issue.

            • notfromhere@lemmy.oneEnglish
              2·
              1 year ago

              I’m not an electrician. I would assume one adapter in the line would probably be fine if it’s a good quality adapter and no chance of coming loose. I would be worried about shorting / fires and would want an adequate breaker behind it, maybe arcflash.

              • Cole@midwest.socialEnglish
                1·
                1 year ago

                You can get someone knowledgeable like an electrician to just change the outlet itself to whatever is best.