3060ti on Ubuntu feels like old Vodoo GPU - eviltoast

Update: I installed CS:GO and it runs insanely smooth. Metro didnt start at all. I now have cycled through many compatibility options and tried proton experimental, latest and now linux runtime. Now it works on solid 60 fps!

Hi folks! I made it! I built a daily driver with Linux!

But I’m running into the first walls, which was expected but is still annoying.

So I bought a 3060ti which I got for a reasonable price and tried playing metro last light redux. Sub 10 fps. I’m pretty baffled atm. Have checked (and for sure, reddit was the first answer) but so far no dice. I changed from open source to proprietary driver, no changes either.

Is there a troubleshooting guide or something? Can I even guarantee my card runs on full capacity without windows? (sorry, I’m not used to linux desktop).

Thanks for reading! Have a good one!

  • Bandicoot_Academic@lemmy.one
    link
    fedilink
    arrow-up
    12
    ·
    1 year ago

    Are you sure your using the official (propriatary) drivers? Sometimes just installing the official drivers isn’t enough and you still might be using the nouvau drivers. Run lspci -v find your gpu and check whats listed as the Kernel driver in use.

    • Haui@discuss.tchncs.deOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Thank you very much for answering.

      Here is the output for lspci -v:

      65:00.0 VGA compatible controller: NVIDIA Corporation GA104 [GeForce RTX 3060 Ti Lite Hash Rate] (rev a1) (prog-if 00 [VGA controller]) Subsystem: PNY GA104 [GeForce RTX 3060 Ti Lite Hash Rate] Flags: bus master, fast devsel, latency 0, IRQ 66, NUMA node 0 Memory at d7000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at b000 [size=128] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: Kernel driver in use: nvidia Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia

      It looks to me as it would be working.

      But now I have another problem: I installed CS:GO and have between 150 and 200 FPS on high. Looks like the 3060ti works after all. :) but now metro doesnt even start. If I hit play, it quickly cycles through start, cloud sync, running, stopped

      This happened before. I then verified the game files and it worked again. Any idea what the issue is?

        • Haui@discuss.tchncs.deOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Thank you so much! This is awesome! Will definitely look this up more often. I’m actually very surprised that games run this smoothly if you tinker with them.

      • optissima@possumpat.io
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Which proton are you using if you’re using it? A current one may be breaking it? Also, are you on Wayland or X11?

        • Haui@discuss.tchncs.deOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          So, I’m very new to this Linux Desktop experience. I have a Linux server that runs cli only so I’m very much not used to the desktop version.

          I tried many proton versions and they all seemed to not work. The only thing that did work (and exceptionally well too) is the steam linux runtime (last option in steam compatibility).

          I had to google to find out what wayland and X11 are. My terminal tells me I’m running X11.

  • poVoq@slrpnk.netM
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    Metro might be running in DX12 mode. The translation layer to Vulkan from DX12 is not as good as the one from DX11 yet. So usually you get better compatibility and framerates by switching the game to DX11 or native Vulkan.

    • Haui@discuss.tchncs.deOP
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      Thanks for answering but I have no idea how that works. Additionally, I got it working now. It is running at 60+ frames after I chose steam linux runtime in the compatibility options.

      • poVoq@slrpnk.netM
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        It should be a in-game menu option or a popup when launching the game. You might have clicked “always use this option” previously, then you need to reset that in the game’s steam menu.

        • Haui@discuss.tchncs.deOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I have paid special attention launching the game since it was running crazy slow. I don’t think I got that option. But in any case it works fine now.

    • Haui@discuss.tchncs.deOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Damn! You’re right. Thanks a lot. I completely forgot about smi.

      This is the output:

      ±--------------------------------------------------------------------------------------+ | NVIDIA-SMI 535.86.05 Driver Version: 535.86.05 CUDA Version: 12.2 | |-----------------------------------------±---------------------±---------------------+ | GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |=========================================+======================+======================| | 0 NVIDIA GeForce RTX 3060 Ti Off | 00000000:65:00.0 On | N/A | | 0% 46C P8 16W / 200W | 371MiB / 8192MiB | 5% Default | | | | N/A | ±----------------------------------------±---------------------±---------------------+

      ±--------------------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=======================================================================================| | 0 N/A N/A 3345 G /usr/lib/xorg/Xorg 155MiB | | 0 N/A N/A 3543 G /usr/bin/gnome-shell 28MiB | | 0 N/A N/A 6093 G …bian-installation/ubuntu12_32/steam 3MiB | | 0 N/A N/A 6104 G …allation/ubuntu12_64/steamwebhelper 11MiB | | 0 N/A N/A 8983 G /usr/bin/nautilus 25MiB | | 0 N/A N/A 9122 G /usr/bin/gnome-text-editor 8MiB | | 0 N/A N/A 9447 G …irefox/3131/usr/lib/firefox/firefox 117MiB | ±--------------------------------------------------------------------------------------+

      I ran CS:GO in 150 to 200 FPS so it seems all right.

  • chocolatine@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I have this exact GPU and can game everyday on my Linux computer with very good performance, so I am not worried for you, you will find a way to fix it. I don’t know about this game in particular but for each game I install, I always check protondb website for other user experience on the game and copy past the commands other users recommend. Then I paste the command in steam settings for the game. Moreover I use feral gamemode which helps improving performances, and proton ge.