honestly, it’s a lot more intact than I thought
Also little cleaner than what I was expecting granted it’s probably been cleaned up from wild life and the recovery crew but still I was expecting a little bit of blood like I’m not even trying to be a gore loving weirdo I just know that humans are basically balloons full of blood and implosions are really violent especially at that depth this sub went to
Now I’m generally curious now that can see the it. That thing is pretty much like a crushed soda can. What really happens to the bodies tho? At depth, The tube goes poof and implodes in milliseconds but do the bodies implode too or they just crushed in the pop can.
They would’ve been instantaneously turned to ash. The vessel temperature at the time of breach would be about 5000 celsius. About the temperature of the sun. Whatever was left would be oozed out the cracks like play-doh
That depends on what happened. If the whole structure collapsed instantly, they are probably crushed by debris and a shockwave. But if there was a “leak” and the pressure equalized without complete destruction maybe the lungs are compressed, ribs broken and eardrums torn. All depending on the speed of equalization. Maybe also bones break (because water is compressible) but the bag of meat and blood should remain intact. So finding a body would help to reconstruct what happened. But I doubt they will find one before hungry animals do.
Not possible for anything but immediate implosion at those depths. Even a microscopic leak would instantly turn into a beach.
Even a microscopic leak would instantly turn into a beach.
I love the beach!
Why? What should lead to that?
I just dont get the point of putting your body down there. if most of what you’re seeing is through the digital displays anyway, why not just send a drone and watch remotely? seems like an awful massive risk and expense to try and actually dive down there for nothing more than looking out a window
Humans do lots of crazy things. Why do people like to jump out of airplanes for example?
Why do we smoke cigarettes?
These are the external parts. None of the pressure hull other than the end caps survived the incident.
Some points:
The occupants did not incinerate. The water temperature and the massive amount of water compared to the air would have overwhelmed any temperature spike from the implosion.
There are no bodies. There is a good chance the occupants were reduced to small bits and jelly as they were ejected from the initial breach along with the air.
They will never find any significant remains. The implosion happened 1.5 hours into a 2 hour descent. Any body parts that remained identifiable would have drifted far from where the largest and heaviest pieces of the submersible settled.
James Cameron, director of the Titanic film, once dove in a submersible to the deepest point in the ocean. So he has connections within the community of submersible designers. Regarding the loss of the Titan, Cameron gave an interview in which he said that he had heard second hand reports from people in the Titan support crew who said that the vessel encountered problems, aborted its dive, dropped ballast, and was attempting to ascend at the moment of the implosion. So the people on board knew what was happening, they probably heard sounds of the hull beginning to strain, although the implosion itself would have been instantaneous.
By all accounts, carbon fiber doesn’t “strain”. It does its thing great right up until it fails catastrophically.
Which is why they used acoustic sensors to monitor the carbon fiber’s integrity instead of strain gauges. They absolutely would have had warning.
The Titan Tragedy—A Deep Dive Into Carbon Fiber, Used for the First Time in a Submersible
*No hull monitoring system was needed during a April 2019 dive when Karl Stanley, submersible expert, took the Titan to 12,000 ft off the coast of the Bahamas. Stanley heard a cracking noise and urged Rush to cancel that summer’s dives to see the Titanic, reported the New York Times. *
Was the hull made purely of carbon fiber?
The hull consisted of a carbon fiber tube with titanium endcaps, one of which served as a door (which could not be opened from inside) and contained the porthole.
I watched this that shows the making of the hull. So it seems that it’s carbon fibre over a metal cylinder. I don’t know if that cylinder is titanium but it doesn’t seem like the hull was pure carbon fibre. That cylinder is nowhere near thick enough for anything but the base for the carbon fibre though so it’s not like it would offer anything but squish in an emergency. But I did find this very interesting (and terrifying somehow):
Hmmm… still not sure…
The Titan Tragedy—A Deep Dive Into Carbon Fiber, Used for the First Time in a Submersible
OceanGate shows a metal tube around which the carbon fiber filament is wound but it may be a mandril removed after hardening of the composite.
I’ll be damned, you’re right, the carbon fiber was wound around a metal tube. My bad.
Can anyone explain why they would bother?
To try and prevent something similar in the future.
