If you want a reaction that you can take energy away from the reaction, the reaction needs to create more energy than it needs to maintain itself. If you fail to take that energy away, the reaction will accelerate and your output will grow even further.
It is basic physics.
The only alternative would be to have an open system that runs on so little fuel that you need to feed it continuously. This has an entirely different level of problems, as now it will be impossible to contain the radiation to the reaction chamber and the containers of the spent fuel. Also with that you would need an entirely different design of how the radioactive material is held in place and how the reactions are controlled. The current way of adjusting how much you block with control rods probably won’t work.
It is just impossible to have an exponential system like the nuclear reactions used in a reactor without active control measures. And active measures can fail.
A reactivity accident is a situation in which such a control device that
absorbs neutrons malfunctions or is accidentally removed for some reason, causing a sharp
increase in the nuclear reaction, leading to an output surge and sometimes a runaway reaction.
Some SMRs, however, are not confined to the existing light water reactor (LWR) concept of ‘no
fuel supply during operation’, but have the concept that fuel supply during operation is possible.
Since such reactors are not overloaded with fuel, there is no possibility of a reactivity accident
even if there is a failure in the control devices.
Page 4. Describing exactly what i said.
n Japan, where even at 30% power with zero coolant flow, the
reactor shuts DON automatically without the insertion of control rods, and heat can be removed
without mechanical means by radiation and natural convection to the water-cooled cooling
panels outside the reactor. Figure 2.2 shows the results of the zero-coolant test.
The US metal-fuelled fast reactor, the Experimental Breeder Reactor-II (EBR-II, 19 megawatts
electrical (MWe)), shows similar results to the above when the coolant flow is set to zero […] Aurora (4 MWth) by Oklo, which applied for a Combined
Construction and Operating License (COL) in 2020, has the same characteristics as the EBR-II.
Page 6, which refers to the graphic on page 7. So this only applies if the reactor was at around 30% or less of the design power output.
Meanwhile, the largest equipment in an NPP is the containment vessel. Containment vessels are
generally much larger than reactor vessels. With a diameter of more than 10 m and a height of
more than 30 m, they cannot be transported by ordinary means, such as by trucks on public
roads. Although a containment vessel is important equipment for preventing the release of
radioactive materials in the event of an accident, it is possible to have a design concept without
a containment vessel if the NPP has other equipment that has equivalent functions or safety
characteristics. The presence or absence of a containment vessel is another guideline for
determining whether modularisation can be achieved.
Page 10.
Yeah great idea. This is Titanic all over again. We don’t need a last resort because we have been so smart, that all preliminary features are deemed infaillable. A story as old as humans building complex technology.
Well there is a difference between marketing and physics
If you want a reaction that you can take energy away from the reaction, the reaction needs to create more energy than it needs to maintain itself. If you fail to take that energy away, the reaction will accelerate and your output will grow even further.
It is basic physics.
The only alternative would be to have an open system that runs on so little fuel that you need to feed it continuously. This has an entirely different level of problems, as now it will be impossible to contain the radiation to the reaction chamber and the containers of the spent fuel. Also with that you would need an entirely different design of how the radioactive material is held in place and how the reactions are controlled. The current way of adjusting how much you block with control rods probably won’t work.
It is just impossible to have an exponential system like the nuclear reactions used in a reactor without active control measures. And active measures can fail.
Impossible?
https://www.eria.org/uploads/media/Research-Project-Report/2021-07-Small-Modular-Reactor-/8_Ch.2-Safety-Economics-SMR.pdf
Page 7
Page 4. Describing exactly what i said.
Page 6, which refers to the graphic on page 7. So this only applies if the reactor was at around 30% or less of the design power output.
Page 10.
Yeah great idea. This is Titanic all over again. We don’t need a last resort because we have been so smart, that all preliminary features are deemed infaillable. A story as old as humans building complex technology.
deleted by creator